Workholding Jigs & Fixtures Equipment
>
Workholding Equipment
WDS 5570 Precision Round Mandrels - Metric Material
Manufactured from high grade steel
hardened and ground
Sizes up to and including 36mm or...
WDS 5571 Precision Round Mandrels - Inch Material
Manufactured from high grade steel
hardened and ground
Sizes up to and including 36mm or...
WDS 6620 Engineers Precision Parallels Material
Manufactured from high quality steel,
hardened and tempered
Ground on all four faces
Di...
WDS 6701 Marlco Angle Collet - Model No 1 Material
Both models are made to a high degree of accuracy for general production operations. They ...
WDS 6702 Marlco Angle Collet Fixtures - Model No 2 Material
Both models are made to a high degree of accuracy for general production operations. They ...
WDS 6712 Marlco Minor Indexing Unit - Chuck Type This unit is fitted with an 80mm 3 Jaw Self - Centring Scroll Chuck, as illustrated.
Collets cannot...
WDS 6721 Marlco Indexing & Dividing Unit Basic unit available as illustrated for mounting special tooling or with standard accessories which ...
WDS 6723 3-Jaw Self Centring Scroll Chucks 125mm and 200mm diameter chucks adapted for direct mounting to the indexing unit are available.
...
WDS 6724 200mm diameter Table with Clamps This robust table has three radial “T” slots and a 16mm diameter central locating hole. ...
WDS 6731 Marlco Horizontal and Vertical - Indexing and Dividing Unit Basic unit available as illustrated for mounting special tooling or with standard accessories which ...
WDS 6735 Headstock Driving Centre This attachment is supplied complete with a No. 3 Morse Taper Centre and Driving Carrier as illustra...
WDS 6736 Tailstock This robust unit is designed specifically for use with the H & V Indexing and Dividing Unit.
Th...
WDS 6751 Spring Collets Steel hardened and ground
These single piece precision collets are used in the following WDS work...
WDS 6761 Marlcobore Collets Material
Steel hardened and ground
This range of flexible collets has been designed for use in t...
WDS 6765 Adjustable Support Designed for use with Marlcobore Collets WDS 6761 when the length to be gripped is less than 25mm, a...
WDS 6781 Base Unit with Index Plunger Material
Body, Cast iron
Central spigot & location pin, Steel hardened and ground
This unit...
WDS 6782 Index Unit Complete Material
Body and plate, Cast iron.
Bushes, location pin & Spigot Steel, hardened ground.
T...
WDS 6783 Index Unit Complete Material
Body, Cast iron
Location Pin & Spigot
Steel hardened & ground
This unit is su...
WDS 6784 Index Unit Complete Material
Body & Plate, Cast iron
Bushes, Location Pin & Spigot
Steel, hardened & grou...
WDS 6785 T-Slotted Adaptor Plate - for 6782 Index Units Material
Plate, Cast iron
Bush, Steel, hardened and ground
For direct mounting onto WDS 6782 In...
WDS 6785 T-Slotted Adaptor Plate - for 6784 Index Units Material
Plate, Cast iron
Bush, Steel, hardened and ground
For direct mounting onto WDS 6784 In...
WDS 6786 Plain Rotating Base Material
Base and top plate - Cast iron
Spindle and bush - steel hardened and ground.
The top pla...
WDS 6788 Single Ended Trunnion Unit Material
Body - cast iron
Spindle bushes and location plunger - Steel case-hardened and ground
...
WDS 6793 Trunnion Journal - Headstock Material
Steel, case-hardened and ground
To suit WDS 6789 and WDS 6790 Trunnion Units
6793-20...
WDS 6794 Trunnion Journal - Tailstock Material
Steel, case-hardened and ground
To suit WDS 6789 and WDS 6790 Trunnion Units
6794-20...
WDS 6821 Clamping Handles & Nuts Material
Eliminates Spanners
Adjust to lock in best position
Handles - Metric
WDS 6822 Index Plunger Unit Heavy duty, plain diameter
As used on WDS 6789 and 6790
This plunger is spring loaded
As a leader in the parts industry WDS workholding equipment is competitively priced and of extremely high quality. Our workholding products allow our customers to get the job done quickly & safely. Here at WDS we understand that every job differs as does the parts required for these jobs. This why we offer such a wide selection of index plungers & collets.
Every product in our workholding collection comes with detailed imagery & descriptions so that you can be certain you are buying the product best suited to the job. Our technical services team are always on hand to aid in any technical queries you may have surrounding our workholding equipment.
Standard Parts & AccessoriesMachine Parts & AccessoriesWorkholding Jigs & Fixtures EquipmentSpencer Franklin Hydraulic WorkholdingBroaches and Broaching Tools
WDS Component Parts Ltd, Richardshaw Road, Grangefield Industrial Estate, Pudsey, Leeds, LS28 6LE, West Yorkshire, England
Registered in England No 6819551 | VAT Reg No: GB 945 9861 64
