Standard Parts & Accessories
>
Clamps and Clamping
WDS 201 Hook Clamp Hook Clamp supplied without screw and spring
Material
Steel. BS 3146:Pt1:CLA4
D=Screw Size
WDS 205 Step Block Each set consists of one pair.
Material
Steel BS.970 Gr.070M20 surface hardened.
Chemical bla...
WDS 205 Step Block These blocks are supplied individually.
Material
Steel BS.970 Gr.070M20 surface hardened. Chemical...
WDS 205 Step Block Large Set Material
Steel BS.970 Gr.070M20.
Surface hardened.
Chemical black finish.
Each set consists of o...
WDS 205 Step Block Wide Material
Steel BS.970 Gr.070M20. Surface hardened. Chemical black finish.
Each set consists of one...
WDS 215 'S' Clamping Device Material
Body - Steel forging BS.EN.10025
Nut - Steel BS.970 Gr.230M07 Hardened
D = Stud Size
WDS 217 Mini Edge Clamp Material
Steel hardened Chemical black finish. B=T-Slot Width For shallower clamping heights, the j...
WDS 220 Double Edge Clamp Material
Tool Steel BS 4659 Gr BH13
Hardened as shown
S = Socket head screw size (not supplied)
...
WDS 220 Double Edge Clamp - Ball Bearing Gripper S=Socket head screw size ( not supplied)
P=Maximum holding force in kg
HRC = Hardness of jaws in ...
WDS 220 Double Edge Clamp - Pull Down Type Material
Tool Steel BS.4659 Gr.BH13
hardened as shown.
S = Socket head screw size (not supplied...
WDS 220 Double Edge Clamp - Soft Jaw Type Material
Tool Steel BS 4659 Gr BH13
Hardened as shown
S = Socket head screw size (not supplied)
...
WDS 220 Double Edge Clamp - Tapped Jaws S=Socket head screw size (not supplied)
P=Maximum holding force in kg
HRC=Hardness of jaws in Rock...
WDS 228 Clamp WDS 228 Material
Steel. BS 970 Gr. 070M20 Surface Hardened Chemical black finish. D=Stud Size B1=Heel Pin S...
WDS 229 Toe Clamp Toe Clamps are powerful, low pofile clamps that grip on the side of the workpiece leaving the top su...
WDS 229 Toe Clamps Toe Only Replacement Toe for 229 Toe Clamps
Supplied in Steel as Standard
Brass available as special order
WDS 230 Clamp Material
Steel. BS 970 Gr. 070M20
Surface Hardened
Chemical black finish.
See 814 Series for ...
WDS 2300 Actima Clamping Device Surface Finish - Steel parts with black finish. Red plastic ball knob. All wearing parts hardened.
...
WDS 233 Crocodile Clamp Material
Heat treated and tempered
Galvanised Clamp
* Clamping force specified is in optim...
WDS 234 Clamp WDS 234 Material
Steel. BS 970 Gr. 070M20 Surface Hardened Chemical black finish. D=Stud Size
WDS 262 Tapped Clamp Material
High Tensile Steel. BS.970 Gr.817M40.
Chemical black finish.
D=Stud Size
WDS 280 Cam Hook Clamp Material
Steel - hardened and ground.
Chemical black finish.
H3= Clamping Movement
P= Clamping ...
WDS 300 Spring Loaded Jack Lock Max. Load - 0.5 t
Material
Body and Hand Knob Cast Iron BS.1452 Gr.250
Support Pin Steel BS.970...
WDS 300 Spring Loaded Jack Lock 300-202 Max Load - 0.5t
Material
Body and Hand Knob Cast Iron BS 1452 Gr.250
Support Pin Steel BS970 Gr.0...
WDS 301 Support Jack Max. Load - 1.5 t
Material
Support Pin and Wedge Steel BS.970 Gr.080M15.
Hand Knob Cast Iron BS....
WDS 302 Support Jack Max. Load - 2.0 t
Material -
Support Pin and Wedge Steel BS.970 Gr.080M15.
Hand Knob Cast Iron
...
WDS 303 Jack Lock Max Load -1.0t
Material
Support Pin - Steel BS.970 Gr.080M15.
Wedge - Steel BS.970 Gr.212A42. ...
WDS 304 Jack Lock Max Load -1.5t
Material -
Support Pin - Steel BS.970 Gr.080M15.
Wedge - Steel BS.970 Gr.212A42....
WDS 309 Screw Jack Material
Body - Cast Iron BS.1452 Gr.250.
Screw - Steel BS.970 Gr.080M15.
Head Hardened. Chem...
WDS 317 Screw Jack Material
Spindle - Carbon steel. Housing - Cast iron painted grey hammer.
P = Holding Load kg
L =...
WDS 319 Wedge Jack Material
Base and Top - Steel BS.970 Gr.080M15
Screw - Steel BS.970 Gr.230M07. Hardened and Ground
WDS 350 Height Setting Screw Jack Revolving Ball Material
Carbon Steel
Chemical black finish
Hardened Steel Ball
Jack Thread - M39 x 3
WDS 352 Support With Revolving Ball Material
Carbon Steel Chemical Black Finish
Hardened Steel Ball
P = Holding Load kg
WDS 354 Cam Operated Clamp Assembly Material
Carbon steel hardened Chemical black finish
Alpha rotation gives S = 5.5
Beta rotation g...
WDS 356 Cam Operated Clamp Assembly Material
Carbon steel hardened Chemical black finish
Alpha rotation gives S = 11
Beta rotation gi...
WDS 357 Eccentric Cam Lever Material- Carbon steel hardened Chemical black finish For use with clamp set 356-201 & 356-202
WDS 359 Clamp With Dowel Material
Carbon steel hardened Chemical black finish
For use with clamp set 356-201 & 356-202
WDS 4100 Cam Ram Clamp 1 Material- Steel parts with black finish All wearing parts hardened Available in Clockwise (C) and An...
WDS 4101 Cam Swing Clamp Material
Steel parts with block finish All wearing parts hardened
Available in Clockwise (C) and...
WDS 4102 Cam Swing Clamp - Bolt Down Base Material
Steel parts with black finish All wearing parts hardened Available in Clockwise (C) and An...
WDS 4103 Cam Push Clamp Material
Steel parts with black finish
All wearing parts hardened
Supplied with setscrew and ...
WDS 4104 Cam Push Clamp Material
Steel parts with black finish
All wearing parts hardened
Supplied with setscrew and ...
WDS 4105 Swing Clamp Assembly Material
Alloy steel heat treated Chemical black finish
P - Max holding force kg using allen key
WDS 411 Pull Down Inserts Technical Information
The WDS Pull-Down Insert (PDI) is a new concept based around an existing meth...
WDS 4317 Plier Clamp - Heavy Duty Heavy Duty plier clamps.
Operates in double shear for long life.
Fitted with triggers for quick r...
WDS 4317 Plier Clamp - Heavy Duty Chemical Black Finish Designed for easy fitting of customised jaws (not supplied).
Heavy duty plier clamp
Operates in do...
WDS 4317 Plier Clamp - Medium duty Medium duty plier clamp
Material
Heavy gauge steel, hardened pins and bushes
Finishing
Zinc ...
WDS 4500 In-Line Clamp with Base Flange - Hand Screw Material
Steel Clamping Rod
Clamp force is based on an operating force of 10daN
WDS 4501 In-Line Clamp with Front Flange - Hand Screw Material
Steel Clamping Rod
Clamp force is based on an operating force of 10daN
WDS 4502 In-Line Clamp with Screw Fitting - Hand Screw Material
Steel Clamping Rod
Clamp force is based on an operating force of 10daN
WDS 4503 In-Line Clamp with Base Flange - Lever operating Material
Steel Clamping Rod
Clamp force is based on an operating force of 10daN
WDS 4504 In-Line Clamp with Front Flange - Lever type Material
Steel Clamping Rod
Clamp force is based on an operating force of 10daN
WDS 4505 In-Line Clamp with Screw Fitting - Lever operating Material
Steel Clamping Rod
Clamp force is based on an operating force of 10daN
WDS 4506 In-Line Clamp Base Flange Body Material
Steel Clamping Rod
Clamp force is based on an operating force of 10daN
WDS 4507 In-Line Front Flange Body Material
Steel Clamping Rod
Clamp force is based on an operating force of 10daN
WDS 4508 In-Line Screw Fitting Body Material
Steel Clamping Rod
Clamp force is based on an operating force of 10daN
WDS 4509 In-Line Clamping Rod Material
Steel Clamping Rod
Clamp force is based on an operating force of 10daN
WDS 590 Advant-Edge Clamps (Mitee Bite)
The new MITEE-BITE Advant-Edge Clamp provides additional clamping force and improved table grip.
...
WDS 590 Aluminium Sub Plates (Mitee Bite) Extruded Aluminum Sub Plates are available in standard sizes in stock, as well as in custom lengths ...
WDS 590 Compact Toe Clamp (Mitee Bite) This cam action fixture clamp provides positive down force while using very little space on a fixtur...
WDS 590 Dyna-Force Clamps (Mitee Bite) The majority of the Dyna-Force clamp is below the surface of the fixture which provides excellent cl...
WDS 590 Fixture Clamp (Mitee Bite) The cam action WDS Mitee-Bite fixture clamp is made up of two simple components: A hardened steel so...
WDS 590 ID Xpansion Clamps (Mitee Bite) The ID Xpansion clamp is the ideal way to hold multiple parts on an inside diameter for multiple mac...
WDS 590 Knife Edge Clamps (Mitee Bite) WDS Knife Edge Clamps can be used instead of the original brass hex clamps for clamping rough cut st...
WDS 590 Long Length Uniforce Channel and Steel Material (Mitee Bite) This material is available in 508mm lengths. Does not include plating or drilled holes.
WDS 590 Machinable Fixture Clamps (Mitee Bite) These clamps, with the machinable steel washers, provide more flexibility for holding round or unusu...
WDS 590 Machinable Uniforce Clamps (Mitee Bite) The compact Mitee-Bite Uniforce clamp is available with extra material on the clamping jaws so it ca...
WDS 590 Mini Riser Kit (Mitee Bite) Mini Riser Kit Contents:
4 clamp base assemblies
2 hex keys
Universal Kit Contents:
1 locating r...
WDS 590 Mitee Bite T-Slot Kits (Mitee Bite) The original MITEE-BITE T-Slot Clamp combines our unique cam action clamping element with a T-nut.
...
WDS 590 Mounting Clamps (Mitee Bite) Clamps are designed for mounting MITEE-BITE Aluminum Sub Plate and many types of machine vices
WDS 590 Multi-Fixture Clamps and Stops (Mitee Bite) The MITEE-BITE Multi-Fixture Clamp offers increased versatility through its unique riser clamp desig...
WDS 590 Series 9 Clamps (Mitee Bite) This adjustable low profile, cam action clamp provides clamping of different size work pieces merely...
WDS 590 Strap Clamps (Mitee Bite) This low profile design promotes superior clamping in both normal and restricted areas with minimal ...
WDS 590 T-Slot Toe Clamps (Mitee Bite) This clamp is like the Compact Toe Clamp, only it is designed to be used in the T-slots of machine t...
WDS 590 Ultra Clamps (Mitee Bite) ULTRA CLAMPS are all new low-profile fixture clamps that will change the way you work. Employ ULTRA ...
WDS 590 Uniforce Clamps (Mitee Bite) The compact, economical MITEE-BITE Uniforce Clamp enables you to fixture more parts on the machine t...
WDS 590 Vise Pallet (Mitee Bite) Reduce set up times and increase production on those small production jobs. The pallets can be reuse...
WDS 600 Jig Feet Button Material
Steel BS.970 Gr.230M07
Case hardened and Ground.
Chemical black finish.
*=D2 is count...
WDS 610 Adjustable Heel Pin Inch Material
Steel BS 970 Gr.212A42
Surface hardened.
Chemical Black Finish.
See 809 Series for simi...
WDS 610 Adjustable Heel Pin Metric Material
Steel BS.970 Gr.212A42.
Surface hardened Chemical black finish.
See 809 Series for s...
WDS 626 Feet Bolt Material
Steel BS.970 Gr.212A42.
Chemical black finish.
For use with 627 Series Feet Nut and ...
WDS 627 Feet Nut Material- Steel BS.970 Gr.212A42. Chemical black finish. For use with 626 Series Feet Bolt and 9...
WDS 628 Rest Block Material- Steel BS.970 Gr.080M15 case hardened and ground. Chemical black finish.
D1=To suit screws
WDS 629 Eccentric Jig Button Material- Steel BS.970 Gr.230M07 case hardened Chemical black finish.
D1= To suit screw size
WDS 631 Jack Screw Material- Steel BS.970 Gr.212A42 head hardened nut surface hardened. Chemical black finish.
WDS 633 Feet Button Inch Material
Steel BS 970 Gr 080M15 case hardened
Chemical black finish
See 811 Series for thi...
WDS 633 Feet Button Metric Material
Steel BS.970 Gr.080M15 case hardened.
Chemical black finish.
See 811 Series for this...
WDS 642 Clamp Button Material
Available in 1.Nylon 2.Brass. 3.Steel BS.970 Gr.230M07
Case hardened and ground
...
WDS 656 Swing Latch Clamp Material
Swing Latch - Steel BS.970 Gr.070M20.
Swivel Pad and Plate - Steel BS.970 Gr.230M07.
C...
WDS 656 Swing Latch Clamp Material
Swing Latch - Steel BS.970 Gr.070M20.
Swivel Pad and Bush - Steel BS.970 Gr.230M07.
Ch...
WDS 660 Spring Material
Spring Steel. BS.5216 B Range 3.
Chemical black finish.
See 812 Series for this part...
WDS 809 Adjustable Heel Pin- Stainless Material
Stainless Steel. BS 970 Gr. 316S11.
See 610 Series for this part in Steel.
WDS 811 Feet Button Material
Stainless Steel. BS 970 Gr. 316S11.
See 633 Series for this part in Steel.
WDS 812 Spring Material
Stainless Steel. BS 970 Gr. 316S42.
See 660 Series for this part in Steel.
D=Stud Siz...
WDS 814 Stub Slotted Clamp Material
Stainless Steel. BS 970 Gr. 316S11.
D=Stud Size
See 230 Series for similar part in...
WDS 877 Toggle Clamps Lite Bracket-16-Stainless Steel Material
304 Stainless Steel
Please refer to 877-201 for this part in Steel.
WDS 878 Toggle Clamps Lite Bracket-20-Stainless Steel Material
304 Stainless Steel
Please refer to 878-201 for this part in Steel
WDS 879 Toggle Clamps Lite Bracket-25.5-Stainless Steel Material
304 Stainless Steel
Please refer to 879-201 for this part in Steel.
Above you will find our exclusive range of clamps and clamping equipment. Our wide selection of clamps includes standard clamps, edge clamps, hook clamps & many more. Not every job is the same and that is why we offer this wide selection of clamps to make sure that you always get the right parts for the job in hand.
All of our clamps come with detailed imagery & descriptions so that you can be certain you are buying the clamp best suited to the job. Our technical services team are always on hand to aid in any technical queries you may have surrounding our clamp products.
See more clamps in our vertical and horizontal adjustable toggle clamps section.
Standard Parts & AccessoriesMachine Parts & AccessoriesWorkholding Jigs & Fixtures EquipmentSpencer Franklin Hydraulic WorkholdingBroaches and Broaching Tools
WDS Component Parts Ltd, Richardshaw Road, Grangefield Industrial Estate, Pudsey, Leeds, LS28 6LE, West Yorkshire, England
Registered in England No 6819551 | VAT Reg No: GB 945 9861 64
