Laminated Bars with Longitudinal Pole (WDS 5694)

Laminated Bars with Longitudinal Pole (WDS 5694)

Product selection

Download CAD

You must be logged in to access this.

Not registered? Register

Laminated Bars with Longitudinal Pole (WDS 5694) (Available) £99,999.00 - £99,999.00 Each

WDS 5694

Type - Laminated Blocks & Bars

Certain parts cannot be secured directly on a magnetic chuck plate because of their particular shape (uneven surface, projections etc) or their dimensions, (great height, thin wall etc).

This becomes possible using laminated blocks which:
• Transmit the magnetic flux of the chuck by means of highly permeable steel pole pieces.
• Offer great flexibility in use with any type or make of magnetic chuck.
• Are rigid, sturdy and resistant to shocks, bending and shearing.
• Can be positioned loose on the chuck or secured to it with laminations being parallel to those of the chuck pole plate.
• Can be machined without damaging the pole plate itself.

These accessories will thus considerably extend the versatility of a magnetic chuck. All of the blocks and bars have soft steel pole pieces and brass laminations which are silver brazed, without the use of rivets, pins or bolts, allowing them to be machined to any required shape. However, it is advisable not to reduce the cross section too much, as this might be detrimental to the rigidity and mechanical strength of the block. When machining these blocks, care must be taken, as when machining any multi-layered materials.

All blocks supplied singly unless indicated that they are a pair.

Pole Pitch: 3mm Steel, 1mm Brass

Print

Available Sizes

Select part number to view prices and download 2D & 3D CAD models at the top of page

WDS No. Select Length Width Height Weight
5694-70-01-032 Select 320 75 25 4900 grams
5694-70-01-065 Select 650 75 25 9900 grams
5694-70-02-032 Select 320 100 40 10400 grams
5694-70-02-065 Select 650 100 40 21100 grams

Ask a question about this product

Are you a human?

Products like this