WDS5724 Technical Information Contains powerful Alcomax magnetic Material All faces of the Magnetic Holder can be simultaneously energised by turning a Tee Handle on the top face. The Tee can also act as variable hold to facilitate accurate positioning of workpieces. The holder has 6 magnetic faces - 3 are flat and 3 are vee surfaces set at an angle of 120 degrees. Once energised, the 6 faces of the unit can be used to position the workpiece at a variety of angles. |
WDS 5724-E938-942 Magnetic Holdfasts WDS5724 Technical Information. The Magnetic Holdfast range are made up of Alcomax 3 magnetic Material. On each Holdfast the magnetic power is confined to the workface. Each unit is equipped with a removable screw down tee handle to facilitate the easy release of the workpiece. 5724-E938 is a cube with holes drilled on 2 faces. 5724-E939, 5724-E940, 5724-E941 are circular and have 2 M8 holes pitched on the top face. |
WDS 5724-922 Magnetic Positioner WDS5724 Technical Information The 5724-922 Magnetic Positioner is a heavy duty unit consisting of 2 magnetic blocks connected by 2 non magnetic steel straps. The 5724-922 SU Magnetic Positioner is a single unit The blocks contain high performance Alcomax 3 magnetic Material Each block has 2 magnetic faces (top & bottom) One of the 2 magnetic faces on each block is vee d to accommodate round workpieces. Each magnetic block is independently controlled by a switch located on the |
WDS 5724-E964 Magnetic Plate Drag WDS5724 Technical Information This powerful plate drag contains powerful permanent ferrite magnets in an aluminium housing. When the drag comes into contact with the workpiece it grips the component securely. The drag incorporates a quick release mechanism for releasing the workpiece. |
WDS 5724-EM985-R Magnetic Tool Rack WDS5724 Technical Information: The toolrack contains 2 x 350mm powerful magnet bars with extruded magnetic rubber lengths housed between two pole pieces. Supplied with fixing screws to wall mounts. |
If you spot an error on this page please contact us via email